<<
Back to News / Events
NEW
7450-XLT RF Subscriber Unit for Alarm Transmission with Full Data
Transfer!
The 7450XLT smart subscriber unit links an
alarm panel to a central station. This 2-way transceiver and repeater
in one is housed in a full size locking steel cabinet for superior
performance. The 7450 XLT supports a wide range of inputs such as
NO /NC/EOL and direct voltage. It automatically senses line cuts;
antenna or cable cuts, and monitors the optional battery or AC power
status. The built in power supply with advanced status reporting and
self-diagnostics make the 7450XLT the first choice for all fire monitoring
needs.
The integrated IntelliTap monitors the alarms panels' digital communicator
output. In normal operation the alarm panel dials the IntelliTap designated
phone number as the primary central station receiver. The IntelliTap
detects this information and receives the data just like a dialer
receiver providing handshake protocols to authenticate a successful
transfer. The alarm data is then forwarded via the AES-IntelliNet
RF wireless network to the central station.
Technical Specifications
7450 XLT Subscriber Unit
Radio: Standard frequency ranges 450-470 MHz and 130-174 MHz
Standard Output power 2 watts (requires FCC license)
Power Input: 16.5 VAC, 30VA
Voltage: 12 VDC nominal
Current: 175mA standby; 800mA transmit
Alarm Signal Inputs:
· 4 individually programmable Zones: NO/NC/EOL, trouble restore
· Telephone line cut monitor,
· Integrated IntelliTap Digital Dialer Receiver
· RS-232
Operating Temperature Range: 0 to 50 C
Storage Temperature Range: -10 to 60 C
Relative humidity range: 0-85% RHC non-condensing
Back up battery: 12V, 4.5 AH option
Low battery reporting: 22.5-minute test cycle
AC status: Reports to central station after approximately 4 minutes
without AC power reports power restoral after approximately 4 minutes
of restored power
Antenna Cut (local reporting),
Open collector output, 200mA maximum load
Size: 13.25”H x 8.5”W x 4.3”D
Weight: 6.8 lbs / 3.1 Kilograms (excluding battery)
IntelliTap module:
I/O Connections:
· RS232 data link
· Incoming phone line
· Phone output from alarm panel
· House phone
Formats supported 3+1, 4+1, 4+2
Contact ID / Point ID
Controls 1 reset switch
Jumper pins for programming
Central Station requirements AES receivers V1.65 or higher
AES NET7K V1.49 or higher
Wireless mesh networking is an innovative technology that is rapidly
being adopted by many industries with applications that need to communicate
data over a large geographic area with a high level of reliability
at a low cost of ownership. The advanced design and 2-way communications
capability provides easy installation, expansion, and management when
compared to alternative communication methods, both wired and wireless.
AES-IntelliNet is the industry leader in delivering high quality wireless
mesh networks to the fire and security industry in commercial, corporate,
government, and educational applications with its broad line of products
and advanced network management tools. Users of AES-IntelliNet networks
have gained significant revenue, communications, and cost advantages
while meeting the high standards of reliability required for the fire
and security industry. AES-IntelliNet alarm monitoring systems are
deployed at hundreds of thousands of locations in over 130 countries.
|
